How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Auto Tech -
Category: Car
Satisfied Customers: 17789
Experience:  18+yrs. experience diagnostics & repair of all makes/models.
Type Your Car Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

1995 Pontiac Grand Am: I have the passenger side upper motor mount

Resolved Question:

1995 Pontiac Grand Am 3.1L Serpentine belt broke. I have the passenger side upper motor mount. I cannot find the way to install the new belt the way it shows on the diagram nunder the hood.
Submitted: 6 years ago.
Category: Car
Expert:  Ron Z. replied 6 years ago.

Install or Connect


  • Rotate belt tensioner
  • Serpentine drive belt.
  • Auxiliary bracket and fasteners. .
  • Engine mount assembly to engine mount bracket support bolts.
Customer: replied 6 years ago.

what is the auxillary bracket and fasteners


Expert:  Ron Z. replied 6 years ago.
The bracket on top of the motor mount. If you've already got it apart, then you've past that point. Removing the mount is just so you can put the belt on (while mount is installed, you can't get the belt around it... obviously)
Customer: replied 6 years ago.
there is a bracket that goes around the powersteering pump pulley that from what i can figure the belt has to somehow go through to line up with the tensioner there is not really enough room to to take all the bolts out to remove that bracket.
Expert:  Ron Z. replied 6 years ago.
After the motor mount is removed, carefully jack up the engine with a floor jack and a piece of wood on the oil pan.
Ron Z. and 4 other Car Specialists are ready to help you

Related Car Questions