Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
i would like to the position the timing marks should be in the two with the chain on them and the big one on the other end. and any important imfo you could give me regarding the timing. the car is a 2000 hyundi accent 1.5
Year: 2000Make: HyundaiMake (other): accentEngine: 1.5? 1.6? Already Tried: nothing dont want to do anything till were sure about the marks position, can you give any other advice about put the timing gear back together?
Hi, thanks for asking.. I have made the instructions for changing the timing belt on your Accent into a pdf file and uploaded them for you.. You can download it to your computer for review, by clicking > here <.If you need anything else, just let me know!Hope it helps!
i need to know what position those little arrows are facing where the chain goes on in the head
OK.. on the top of your valve cover.. does it say 12V or 16V?
16v
OK.. You have the 1.6L engine.The timing belt instructions are the same for the 1.5 and the 1.6.. so you are in good shape on that.Hope it helps!
we just bought all new stuff for the motor because it over heated so we replaced a lot of things but we thought it was a 1.5 motor and got the parts for that size would that matter a lot. and do i just follow that pdf file u sent to do the timing.
No, they are the same engine.. same parts. The only difference is the 1.5 is a SOHC, and the 1.6 is a DOHC engine. The head gaskets are the same part number.Yes, you would follow the same pdf file for the timing belt.. same same.Cyber Tech40076.3488210648
so where do they get the extra 100cc from, slightly shorter pistons? when running, which way does the crank pully run, clockwise? and when exhaust & intake cam lobs face oppisite each other at 90 degrees to the followers, what stroke is that piston on?
Yes, the engine turns clockwise.Same piston bore.. longer throw on the crank.
this is my last request could you please send me another pdf file on the timing because the last one was for a 1.5 sohc but i need one for a 1.6 dohc, the water pump and other stuff is one the wrong side
Sure is different on that, isn't it?No problem.. HERE you go.Cyber Tech40076.3826927894
sorry mate my husbands just wants to know the answer to that last question
when exhaust & intake cam lobs face oppisite each other at 90 degrees to the followers, what stroke is that piston on?
That would be the point of ignition (TDC) on the #1 cylinder.. when you put those marks the way they are in the picture.I understand the concern, as this is an interference engine, and if done wrong, then it could bend some valves.. Just put them together (like in the picture), and make sure the crank timing mark is lined up before you tighten the cams down on the head.Cyber Tech40076.3909327546
Shop Owner
+15 years experience on imports and domestics. Bumper to bumper diagnosis & repair.