Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
After replacing the battery in my 2003 Forester, the 6 CD changer will not accept CD's in slots 3,4,5 and shows the slots as having CD's in them. I have used the "Eject All" function but the results are the same, the CD changer still shows CD's in slots 3-5. What do you recommend to reset the CD Changer? Regards
Year: 2003Make: SubaruModel: ForesterEngine: 2.5 L Already Tried: "Eject All" command
It sounds like the Unit may have recieved a voltage spike & may need to be repaired.
Try this
Eject all CD'sTurn Unit offDisconnect Positive & Negative Battery Cable.Briefly touch them togetherReconnect Positive CableReconnect Negative CableTurn Key On & if the CD is Initializing, let it continue & then when it stops, Load CD's
Aftermarket & Factory Electronics
Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.