How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JacobTD Your Own Question
JacobTD
JacobTD, Mechanic
Category: Car
Satisfied Customers: 1070
Experience:  12 Years First hand
19108227
Type Your Car Question Here...
JacobTD is online now
A new question is answered every 9 seconds

06 transit duratorq turbo fwd. no start after change fuel filter.

Resolved Question:

06 transit duratorq turbo fwd. no start after change fuel filter. where best to bleed? (tried to crack off injector pipe, injector appears to be turning?)
Submitted: 7 years ago.
Category: Car
Expert:  JacobTD replied 7 years ago.
You are correct on location to bleed. You will need to actully use wrench to hold injector while removing feed lines. Do all injectors crank a few sec until a good amount of fuel is squirting out. Tighting the lines and start. Might need to repeat this a second time. Works everytime.
JacobTD
JacobTD and other Car Specialists are ready to help you

Related Car Questions