How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask supertech Your Own Question
supertech, mastertech
Category: Car
Satisfied Customers: 2251
Experience:  ase master auto tech,triple chrys master tech,42 yr experinece,adv. level spec. ASE. HEV chrys spec.
Type Your Car Question Here...
supertech is online now
A new question is answered every 9 seconds

Main Bearing Rod Bearing Head Intake Manifold Ordered from LR..tranny

This answer was rated:

Need torque specs for 2003 Discovery II Land Rover 4.6 l engine:

Main Bearing
Rod Bearing
Intake Manifold

Ordered from LR, but they sent tranny specs instead. Help! Got to get this engine together!

Hi my name is John.








Let me know if you need more.


If I have help you,please push the accept button when were done.


Thank you for choosing just answer

supertech and 7 other Car Specialists are ready to help you
Customer: replied 7 years ago.
Hi John,

I don't see the specs for the rod and main bearings. Can you supply these?





Let me know if you need more

Customer: replied 7 years ago.
Thanks for your quick response. Sadly, the pages won't open. Can you resend? I'd really appreciate it.

The rods are 20nm and stage two is 80 degrees more.


The mains are 13.5nm for both the mains and side main bolt first.


Stage two is 1-8 bolts 72nm


9-10 the rear bolts are 92nm


The side mains stage two are 45nm