How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick M. Your Own Question
Rick M.
Rick M., ASE Certified Technician
Category: Car
Satisfied Customers: 21
Experience:  Automotive Service Degree, 15 Years self employed in auto repair, ASE certified
Type Your Car Question Here...
Rick M. is online now
A new question is answered every 9 seconds

how do you get the powersteering belt on a 2000 kia sephia

Resolved Question:

how do you get the powersteering belt on a 2000 kia sephia
Submitted: 7 years ago.
Category: Car
Expert:  Rick M. replied 7 years ago.
Hi my name is XXXXX XXXXX I will try to help you Follow instrictions below and check pictures included alternator and pwr steering pump has adjusting bolts to tighten belts
  1. Remove A/C and P/S drive belt, if equipped.
  2. Loosen generator mounting bolt and adjusting bolt.
  3. Remove generator belt.
  4. Install new generator belt and adjust to specification.
  5. Tighten all bolts to specified torque. Tightening torque Mounting bolt:
27-38 lb-ft (37-52 N.m, 3.8-5.3 kg-m)

Adjusting bolt:
14-18 lb-ft (19-26 N.m, 1.9-2.6 kg-m)

Customer: replied 7 years ago.

where is the a/c located and is there a generator mounting bolt and ajusting bolt near the ac


Expert:  Rick M. replied 7 years ago.
The AC compressor is located on the bottom right of the crankshaft see pic, There is only 3 bolts on the generator one upper and one lower and there is the adjusting bolt at the back of the generator.No adjusting bolt near AC. don't forget to clik on accept if this answers your questiongraphic
Rick M. and 2 other Car Specialists are ready to help you

Related Car Questions