Recent Feedback
does anyone know how to set the timing on a 2.2 liter 2000 isuzu rodeo
Optional Information: Year: 2000Make: IsuzuModel: rodeoEngine: 2.2 liter Already Tried: i jus need to knowq where to set the timing marks for replacing timing belt
Hello Foolofit,
Thanks for coming to Just Answer to ask a question.
Here are those timing marks you asked about.
where does the locking tool come from and is is neccesary also do you have any written instructions
The first screen shot of the total 3 I sent states the procedure to follow. You would need to buy the tool from a parts truck like matco or snap or a isuzu dealer. Yes you can get by without, its just a little harder.
one last question mine is a 2.2 liter rodeo s the diagram is for an ls is there a difference
Both have the same engine.
Experience: Specialized Tech. in Transmission, Transfer Case, Driveline, Brakes, Engine, Elect.,and Suspension
Relist: I still need help.im having problems finding what the crankshaft aligns too there are no marks on car body or shroud
Greetings,Moose is offline right now, see if this file will help you. let me know if I can help further. Good luck, Bob
does the no. 1 cyl. start at the firewall or radiator
can u tell me which is the no.1 plug
do u know what the crankshaft pully aligns with and do i need to pull the pully off to find marks i see no marks oin the waterpump either
You need a jaw puller to get the crank pulley off. There is a crank mark on the bottom of the block shown in the picture as a tab. The water pump has to have a mark on it somewhere like the picture, take another look to double check.