How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ase_master327 Your Own Question
ase_master327, Shop Owner
Category: Car
Satisfied Customers: 5288
Experience:  +15 years experience on imports and domestics. Bumper to bumper diagnosis & repair.
Type Your Car Question Here...
ase_master327 is online now
A new question is answered every 9 seconds

firing sequence for 1992 mx3 , I replaced my wires

This answer was rated:

firing sequence for 1992 mx3 , I replaced my wires an f**ker everything up
Hi, thanks for asking...

To speed things up...
Here is the 4:

You will want to pull #1 cylinder to top dead center on compression stroke, and make sure the rotor lines up with the correct termianl on the cap also.

Hope it helps!
ase_master327 and other Car Specialists are ready to help you
Customer: replied 7 years ago.

Thank You!

Two wires crossed

Very Good

Related Car Questions