How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott Your Own Question
Scott
Scott, ASE Certified Technician
Category: Car
Satisfied Customers: 1638
Experience:  Ase certified, 24 years, bumper to bumper all makes
12331040
Type Your Car Question Here...
Scott is online now
A new question is answered every 9 seconds

2003 KIA Sedona: a broken drivers side door handle..pin..corrosion

Customer Question

My 2003 KIA Sedona has a broken driver's side door handle - actually it appears that the pin broke due to corrosion. How do I replace that pin? Thanks
Submitted: 7 years ago via Automotix.
Category: Car
Expert:  Scott replied 7 years ago.

Hello,

 

You will need to replace the entire door handle, which includes removing the door panel. You did not specify if it was interior or exterior, so, I will supply both.

 

If it is an exterior handle, preform the door panel removal, raise window all the way up, and you will see two bolts on either side of the handle. {take care as not to loose the door lock rod and handle rod positions. reinstall.

 

Scott.

 

Removal
1.Disconnect negative battery cable.
2.Remove door trim.
A.Remove door garnish.
B.Remove one screw on the inside door handle cover.

C.Remove inside door handle cover.
D.Remove one screw on the pull handle.

E.Remove three screws on the trim.

F.Remove door trim by lifting it up.
G.Disconnect window operating switch connectors.
3.Remove two screws on the pull handle bracket.

4.Remove inside door handle.

Related Car Questions