How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, ASE Certified Technician
Category: Car
Satisfied Customers: 15309
Experience:  12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes
Type Your Car Question Here...
Richard is online now
A new question is answered every 9 seconds

size wrench is needed to change rear breaks on a 1999 jaguar xk8?

Customer Question

what size wrench is needed to change rear breaks on a 1999 jaguar xk8?
Submitted: 7 years ago.
Category: Car
Expert:  Randall C replied 7 years ago.

Hello, I hope this pic come through ok. You remove 2 rubber dust caps and I am pretty sure it is an allen wrench that is used to remove the 2 bolt pins.



  1. Remove caliper housing from caliper carrier.
    • Remove anti-rattle spring.
    • Remove dust covers.
    • Remove guide pins.
    • Remove housing from carrier.

NOTE: The inner brake pad is fitted with a clip which secures the pad into the caliper piston.


Expert:  Richard replied 7 years ago.

Hello Rodney 2020 and welcome to


Tracer is correct in the procedure but the exact size of the allen caliper pins is a 7mm.

Related Car Questions