How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew P. Your Own Question
Andrew P.
Andrew P., ASE Master Certified Technician
Category: Car
Satisfied Customers: 2
Experience:  ASE Master Technician, 609 Certified, Foreign & Domestic
15670140
Type Your Car Question Here...
Andrew P. is online now
A new question is answered every 9 seconds

How to reprogram Bulldog Remote Car Starter. Had battery disconnected

Customer Question

How to reprogram Bulldog Remote Car Starter. Had battery disconnected and now remote start does not stay engaged long enough to star vehicle, causing it to overfuel. Need to lengthen time of starter engage through remote.
Submitted: 7 years ago.
Category: Car
Expert:  Andrew P. replied 7 years ago.
To program with the four function remote I'm familiar with you must first enter the programming mode for the remote start. To do this you:
1. Turn the ignition switch from on to off 3 times leaving it in the off position on the 3rd time.
2. Push the program button 8 times holding it down on the 8th press (you should hear four chirps and a long chirp that lets you know you're in the programming mode).
3. To change start timer press the unlock button, you should hear chirps, they are as follows:
1 chirp - 0.6 seconds
2 chirps - .08 seconds
3 chirps - 1 second
4 chirps - 1.2 seconds
5 chirps - 1.4 seconds
6 chirps - 1.6 seconds
7 chirps - 1.8 seconds
8 chirps - 2 seconds
9 chirps - 3 seconds
10 chirps - 4 seconds
Note: chirps will be accompanied with led flashes

To exit the programming press the unlock button and you should hear 3 long chirps and parking light flashes.