How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask stin1974 Your Own Question
stin1974
stin1974, Auto Service Technician
Category: Car
Satisfied Customers: 765
Experience:  Domestic transmission diagnostics and troubleshooting. General repair diagnostics and troubleshoot.
2267585
Type Your Car Question Here...
stin1974 is online now
A new question is answered every 9 seconds

Diagram for chaging the serpentine belt in 1996 oldmobile aurora

Customer Question

diagram for chaging the serpentine belt in 1996 oldmobile aurora
Submitted: 7 years ago.
Category: Car
Expert:  stin1974 replied 7 years ago.
What engine size?
Customer: replied 7 years ago.
4.0
Expert:  stin1974 replied 7 years ago.
graphic
  • Release belt tension and remove belt from power steering and alternator pulleys. Twist belt to get between tensioner and front cover and between power steering pulley and engine mount bracket.
  • Raise and support vehicle.
  • Turn wheel to the extreme right and remove right side splash shield.
  • Remove belt from crankshaft and A/C compressor pulleys. Twist belt to get between idler pulley and engine mount bracket.
  • Lower vehicle.
  • Twisting new belt to get past the front cover, install belt around power steering pump pulley, Fig. 15. Allow belt to hang free.
  • Twist belt to get between tensioner and front cover, wrap belt around alternator.
  • Remove belt from power steering pulley and set aside.
  • Raise and support vehicle, then twist belt to get between tensioner and front cover, wrap belt around crankshaft and A/C compressor pulleys.
  • Install right side splash shield and lower vehicle.
  • Position belt around power steering pulley and release tensioner.
  • stin1974 and 4 other Car Specialists are ready to help you
    Customer: replied 7 years ago.

    do you have to remove the motot mount on the right side to get the belt off

     

    Expert:  stin1974 replied 7 years ago.
    Shouldnt have to. I posted the written instructions late so I dont know if you saw them.