How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, ASE Certified Technician
Category: Car
Satisfied Customers: 15309
Experience:  12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes
Type Your Car Question Here...
Richard is online now
A new question is answered every 9 seconds

jaguar 2000 S type 4.0 lt, Denso starter removal. How to remove

Customer Question

jaguar 2000 S type 4.0 lt, Denso starter removal. How to remove upper bolt? Special wrench?
Submitted: 7 years ago.
Category: Car
Expert:  Richard replied 7 years ago.

Hello and welcome to


There's really no special tool. What you can do is remove the engine mount and use an extension and ratchet or you can use a shallow socket and a fine tooth ratchet. The bolts are usually very tight do to corrosion.

Customer: replied 7 years ago.

how do i remove thr eng. mount?

Expert:  Richard replied 7 years ago.
There are two ways to do it. You can either remove the 15mm nuts on the top and bottom of the mount then jack up the engine to remove the mount or you can remove the lower nut then the 13mm bolts holding the bracket to the engine block. I usually will remove the bracket and mount as an assembly.
Customer: replied 7 years ago.

ok, removal of the engine mount is tougher or harder than theh job.

We already removed the stator assembly, removing the 8mm bolts unacoupled the rotor and removed the upper bolt and hole starter assy. Thanks for you comments.

I'll not charge for this.

Expert:  Richard replied 7 years ago.
So you already removed the starter? What was your question?
Customer: replied 7 years ago.

No, that was the question. I done it this way while I wait for an answer. First David ( one of tyou Tech's ) was trying to solve it but he couldnt, so I keep trying to remove it.

Untill I make it this way. But dont worry be happy thanks for your help.

Best Regards

Expert:  Richard replied 7 years ago.



Good luck in the future. Thanks for using

Related Car Questions