How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jay Your Own Question
Jay
Jay, Mechanic
Category: Car
Satisfied Customers: 596
Experience:  5 yrs experience with Gm, 9 years in automotive shops trained at SAIT
12620940
Type Your Car Question Here...
Jay is online now
A new question is answered every 9 seconds

1994 GMC: nut..the driveshaft yoke to the transfer case pinnion

Resolved Question:

I have a 1994 GMC jimmy. I need to remove the front driveshaft to replace the encoder motor on the transfer case. What size is the nut that holds the driveshaft yoke to the transfer case pinnion?
Submitted: 8 years ago.
Category: Car
Expert:  Jay replied 8 years ago.
HelloCustomer the socket that you need to removed the nut is 1"1/4.
Jay and 7 other Car Specialists are ready to help you

Related Car Questions