How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Amedee Your Own Question
Amedee, Former ASE Master Tech
Category: Car
Satisfied Customers: 24123
Experience:  ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector
Type Your Car Question Here...
Amedee is online now
A new question is answered every 9 seconds

happen--- on a sliding or floating properly..rotor

This answer was rated:

i really need to know if i put the bolts in the wrong spot what would happen--- on a sliding or floating caliper the two bolts one has 3 notches on the end and the other one has 2 notches on the end which one goes on the bottom and which one goes on the top. if i did get them confused and put in the wrong spot would it work properly or would it cause damage to the rotor. help very confused female here
HiCustomer Thank you for asking your question on JustAnswer. The other Experts and I are working on your answer. By the way, it would help us to know:
-What year is your Car?
-What make and model is your Car?
-How many miles are on your Car?
-What type of engine is in your Car?
-What have you already tried?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 7 years ago.
the vehicle is a 2000 kia sportage two door two wheel drive
They are both different sizes correct?

If not, it should not matter where they go.
Amedee and 6 other Car Specialists are ready to help you

Related Car Questions