How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Your Own Question
Dave
Dave, ASE Certified Technician
Category: Car
Satisfied Customers: 210
Experience:  A.S.E Technician
12533324
Type Your Car Question Here...
Dave is online now
A new question is answered every 9 seconds

How to replace 2004 maxima camshaft sensor

Customer Question

how to replace 2004 maxima camshaft sensor
Submitted: 8 years ago.
Category: Car
Expert:  Dave replied 8 years ago.
WelcomeCustomerThanks for being a justanswer customer Dave
graphic
  1. Loosen the fixing bolt of the sensor.
  2. Disconnect camshaft position sensor (PHASE) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
graphicCheck resistance as shown in the figure.
graphic

Customer: replied 8 years ago.
where is the sensor located? how much work is involved,
Expert:  Dave replied 8 years ago.
Customercamshaft sensor is mounted on the top of the motor to the right of the throttle body. The time to replace the sensor is 0.4 hours. there is one wiring plug & a mounting bolt to remove.
Expert:  Dave replied 8 years ago.
There are two cam sensors one on the left side of the motor and one on the right side.
Expert:  Dave replied 8 years ago.
There is a TSB on this Click Link below to read it. Dave
http://www.sendspace.com/file/i6n54o
Customer: replied 8 years ago.

which sensor is considered in bank one, front or back?

Expert:  Dave replied 8 years ago.
Bank 1 is the sensor to the right of the throttle body.

Related Car Questions