How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask david Your Own Question
david
david, Auto Service Technician
Category: Car
Satisfied Customers: 1500
Experience:  Certified Master Technician,Certified in diesel & gasoline engines
533087
Type Your Car Question Here...
david is online now
A new question is answered every 9 seconds

99 grand prix: my answer, on removing the key lock

Customer Question

look i payed you for my question, so where is my answer, on removing the key lock from the 99 grand prix.
Submitted: 8 years ago.
Category: Car
Expert:  david replied 8 years ago.

Hi thank you for your question hope this helps.

 

there seamed to be a problem with the last expert.

so i hope you let me try.

This site tacks your deposit but your not charged at all until you click the accept button.

 

Ignition Lock Cylinder

Removal & Installation

To Remove:

  1. Disconnect the negative battery cable.
  2. Remove the upper and lower steering column trim covers.
  3. Disconnect the lock cylinder electrical connector from the harness on the column.
  4. Insert the key in the steering column lock cylinder.
  5. Turn the key to the START position.
  6. Install a 1/16 allen wrench into the hole on top of the lock assembly to release the lock cylinder retaining pin.
  7. Turn the steering column lock cylinder set to the RUN position.
  8. Pull the lock cylinder out of the lock module assembly.
  9. Remove the key from the lock cylinder.

graphic

 

graphic

 

To Install:

  1. Insert the key into the lock cylinder.
  2. Line up the locking tab and the positioning tab of the lock cylinder with the locking tab slot and the positioning tab slot in the lock module assembly.
  3. Push the lock cylinder into the lock module.
  4. Rotate the lock cylinder in all positions.
  5. Connect the lock cylinder electrical connector.
  6. Install the steering column covers.
  7. Connect the negative battery cable.

 

 

hope this helps