How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rich Your Own Question
Rich
Rich, Technician
Category: Car
Satisfied Customers: 708
Experience:  ase certified, mitsubishi certified, kia certified and landrover certified technician
10415458
Type Your Car Question Here...
Rich is online now
A new question is answered every 9 seconds

How to remove a heater core on 1995 pontiac grand am

Resolved Question:

how to remove a heater core on 1995 pontiac grand am
Submitted: 8 years ago.
Category: Car
Expert:  Rich replied 8 years ago.

Here is the proceedure.

 

Good Luck

Rich

 

 

REMOVAL & INSTALLATION

See Figures 1 through 5

  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.

Click image to see an enlarged viewFig. 1: Unfasten the sound insulator retaining bolts ... Click image to see an enlarged viewFig. 2: ... then remove the sound insulator

  1. On some models it may be necessary to remove the steering column opening filler.
  2. Remove the floor or console outlet ductwork and hoses.
  3. Remove the heater core access cover.

Click image to see an enlarged viewFig. 3: Remove the heater core access cover

  1. Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.

Click image to see an enlarged viewFig. 4: Unfasten the heater core retaining bolts; most later models are secured with clamps Click image to see an enlarged viewFig. 5: Remove the heater core from the vehicleTo install:

  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.
Rich and 2 other Car Specialists are ready to help you