How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad, ASE Certified Technician
Category: Car
Satisfied Customers: 2366
Experience:  ASE Certified Master Technician
Type Your Car Question Here...
Brad is online now
A new question is answered every 9 seconds

ford explorer location of crank sensor

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Car
Expert:  Brad replied 8 years ago.
Hello eric mars, and welcome to!

The Crankshaft Position Sensor is located at the bottom of the front of the engine, right next to the Crankshaft pulley. You simply unbolt the old one and install the new one, so the paper pad at the end of the sensor touches up against the tone ring on the pulley assembly. Once started, the paper will get peeled off by the ring, and this will provide the perfect air gap between the sensor and the ring.

Good luck!

Brad and 2 other Car Specialists are ready to help you

Related Car Questions