How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daryl Your Own Question
Daryl
Daryl, Shop Owner, Certified Mechanic
Category: Car
Satisfied Customers: 12548
Experience:  28 years experience, Master Mechanic
8994801
Type Your Car Question Here...
Daryl is online now
A new question is answered every 9 seconds

tension pulley removal on a 2002 chevy cavalier

This answer was rated:

No Comment Added
Are you trying to remove the whole tensioner or the pulley on the tensioner.
Customer: replied 8 years ago.
Reply to high tech's Post: i am trying to emove the whole assembly, but if the pulley is easier to remove then the whole assembly then i would do that. I have the whole assembly, so i would rather replace the whole thing.

I believe the bolt takes a 15mm or 13mm and the direction to change are below.

Removal Procedure
1. Remove the drive belt.
2. Remove engine mount strut.
Fig. 28: Engine Mount Strut

3. Remove motor mount. Fig. 29: Motor Mount
4. Raise engine to access tensioner bolt.
5. Remove tensioner bolt and tensioner

graphic

graphic

graphic

Daryl and other Car Specialists are ready to help you