How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ted G. Your Own Question
Ted G.
Ted G., ASE Certified Technician
Category: Car
Satisfied Customers: 6089
Experience:  20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness
7183013
Type Your Car Question Here...
Ted G. is online now
A new question is answered every 9 seconds

how to replace the egr valve on a 1993 lincoln towncar

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Car
Expert:  Ted G. replied 8 years ago.
Once you locate it on the manifold, you need to remove the large pipe fitting first. Then pull the vacuum line off, then remove the 2 bolts and pull it off. Replace the gasket, then thread in the big pipe first, do not tighten all the way. Replace the 2 bolts then tighten them and the pipe. Replace the vacuum hose and you're done.graphic
Customer: replied 8 years ago.
I know the location of the egr but there is not enough room to do what you say; do you have to take any thing loose.
Expert:  Ted G. replied 8 years ago.
No, but you may need to use a crowfoot wrench on that pipe fitting.
Ted G. and 10 other Car Specialists are ready to help you