How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask OnlineHelp Your Own Question
OnlineHelp
OnlineHelp, Mechanic
Category: Car
Satisfied Customers: 3423
Experience:  Mechanic
9051600
Type Your Car Question Here...
OnlineHelp is online now
A new question is answered every 9 seconds

1995 nissan: other end of hose be attached..diagram

Resolved Question:

1995 nisan altimastilltrying to locate pcv valve where would the other end of hose be attached to from pcv valve to? please show diagram
Submitted: 8 years ago.
Category: Car
Expert:  OnlineHelp replied 8 years ago.

Hello and thank you for choosing Just Answer.

One end is on the crankcase while the other is on the intake manifold

The crankcase ventilation system returns blow-by gas to the intake manifold. A Positive Crankcase Ventilation (PCV) valve is used to meter the gas and is located in the breather separator under the intake manifold.

installation.
The PCV valve, located under the intake manifold on the rear side of the engine, screws into an oil separator

The PCV valve, located under the intake manifold on the rear side of the engine, screws into an oil separator

The PCV valve is located under the intake manifold in the oil separator.

  1. Disconnect the vacuum hose from the PCV valve.

  2. Unscrew the PCV valve from the breather separator under the intake manifold.

To install:

  1. Screw the PCV valve into the breather separator under the intake manifold.

  2. Connect the vacuum hose to the PCV valve.

 

Diagnosis & Testing

PCV system and airflow schematic

PCV system and airflow schematic

OnlineHelp and 8 other Car Specialists are ready to help you