How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tristan Franklin Your Own Question
Tristan Franklin
Tristan Franklin, MASTER ASE CERTIFIED
Category: Car
Satisfied Customers: 1610
Experience:  8yrs. exp. engine repair performance brakes electrical air condition
10186415
Type Your Car Question Here...
Tristan Franklin is online now
A new question is answered every 9 seconds

Need a spark plug wiring diagram for a 2004 pontiac grand am 3.4 V6

Customer Question

No Comment Added
Submitted: 8 years ago.
Category: Car
Expert:  Tristan Franklin replied 8 years ago.

i hope i helped and please accept if satisfied. thanks T-MAN

  1. Turn OFF the ignition.
    Object Number: 211481  Size: SH
    Click here for detailed picture of above imageidth=

    Notice: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.

  2. Remove the spark plug wires 2, 4, and 6 from the engine left side spark plugs.
  3. Remove the spark plug wires from the retaining clips.
    Object Number: 211485  Size: SH
    Click here for detailed picture of above imageidth=
  4. Remove the spark plug wires 1, 3, and 5 from the engine right side spark plugs.
  5. Remove the spark plug wires from the retaining clip.
    Object Number: 162818  Size: SH
    Click here for detailed picture of above imageidth=
  6. Remove the spark plug wires from the ignition coils.
  7. Remove the spark plug wires from the engine.
  8. If you are replacing the spark plug wires, transfer any of the following components:
    Spark plug wire conduit
    Spark plug wire retaining clips

Installation Procedure


    Object Number: 162818  Size: SH
    Click here for detailed picture of above imageidth=
  1. Install the spark plug wires to the engine.
  2. Install the spark plug wires to the ignition coils.
    Object Number: 211485  Size: SH
    Click here for detailed picture of above imageidth=
  3. Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
  4. Install the spark plug wires to the retaining clip.
    Object Number: 211481  Size: SH
    Click here for detailed picture of above imageidth=
  5. Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
  6. Install the spark plug wires to the retaining clips.