How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MIKEVIN_BEGGS Your Own Question
MIKEVIN_BEGGS, ASE Certified Technician
Category: Car
Satisfied Customers: 162
Experience:  General Motors, Ford, & Mitsubishi Certified technician.
Type Your Car Question Here...
MIKEVIN_BEGGS is online now
A new question is answered every 9 seconds

outback: HI I recently had to replace a 97 jd25 in my 97 leg.

Customer Question

HI I recently had to replace a 97 jd25 in my 97 leg. outback. The only engine avialible was a JDAM motor. After the engine swap the car started up with no noises or misses. After about a minute the engine started to rattle like the rod bearings were gone. I pulled that engine and had it replaced with another only to have the same problem after about 2 minutes
Submitted: 9 years ago.
Category: Car
Expert:  MIKEVIN_BEGGS replied 9 years ago.

Hello, my name is Kevin.

Where did you get the motors?


Customer: replied 9 years ago.
The engine is a take out form japan domestic market. I checked the compression and all for cylinders are in the 160 range. Oil pressure is fine.

Related Car Questions