How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask OnlineHelp Your Own Question
OnlineHelp
OnlineHelp, Mechanic
Category: Car
Satisfied Customers: 3423
Experience:  Mechanic
9051600
Type Your Car Question Here...
OnlineHelp is online now
A new question is answered every 9 seconds

1997 dodge dakota: 4 cyl. 2 wheel drive and there is no bleeder

Customer Question

this is a 1997 dodge dakota 4 cyl.XXXXXand there is no bleeder how do you ge air out?
Submitted: 8 years ago.
Category: Car
Expert:  OnlineHelp replied 8 years ago.

Hello and thank you for choosing Just Answer.

It does not require bleeding, however if you must bleed it then you have to do it with a power/remote bleeder.

Hydraulic System Bleeding

The hydraulic linkage system is serviced as an assembly only. No maintenance is required. The individual components that form the system cannot be overhauled or serviced separately. The cylinders and connecting lines are sealed units. Bleeding or flushing is not required.

Fluid level will increase as the clutch wears. A level ring is provided on the reservoir. Level should not be above the ring. If it is, suspect an unacceptable amount of clutch wear.

 

Customer: replied 8 years ago.
had to change the slave cylinder line was broke. Not can't get clutch to work
Expert:  OnlineHelp replied 8 years ago.
Like I said, you cannot bleed the clutch system manually (No bleeder screw it's sealed). The only way you can bleed the system is by using a Power/Remote bleeder.