Ask a Car Mechanic and Get Answers to Your Car Questions ASAP
Hi my name is John.
There a tech service bulleten on this.
Some customers may comment that the windshield wipers park in the outwipe (vertical) position.
This condition may be caused by a bent park tab on the windshield wiper motor bracket.
To correct this condition, install a new windshield wiper motor crank arm and a windshield wiper motor bracket service kit. Use the following service procedure
Reinstall the windshield wiper drive system module into the vehicle. Refer to the Wiper Drive System Module Replacement procedure in the Wipers/Washer sub-section of the Service Manual (SI Document ID # XXXXX
Let me know if you need more.
Please push the accept button when were done.
Thank you for choosing just answer.
Remove the windshield wiper motor from the windshield wiper motor bracket. Refer to the wiper motor Replacement procedure in the Wipers/Washer Systems sub-section of the Service Manua