How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Car
Satisfied Customers: 29967
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
3195632
Type Your Car Question Here...
Eric is online now
A new question is answered every 9 seconds

ford focus abs light stays on after wheel bearing replacement

This answer was rated:

No Comment Added

Hi,

Was the ABS light on before replacing the hub bearing?

Customer: replied 8 years ago.
Reply to Eric's Post: No

Hi,

The you want to check the following:

  • poor connection-loose or grease or dirt in connection
  • pinched wire during installation
  • sensor ring installed broken during installation
  • hub bearing installed wrong-the side with sensor ring(colored black) has to at the wheel speed sensor side of wheel knuckle
  • grease or dirt on end of speed sensor
  • end of speed sensor damaged when hub bearing replaced

 

Eric and 3 other Car Specialists are ready to help you