How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20435
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

1989 ISUZU Trooper: you set the timing on an ISUZU 2.6L 4 cylinder

Customer Question

How do you set the timing on an ISUZU 2.6L 4 cylinder in a 1989 ISUZU Trooper II?
Submitted: 8 years ago.
Category: Car
Expert:  Lurch replied 8 years ago.


Adjust ignition timing under the following conditions:

  1. Engine at normal operating temperature.
  2. Lights, A/C, and accessories turned off.
  3. Engine idling at proper idle speed, with throttle valve completely closed and idle switch "ON" (see IDLE SPEED under ADJUSTMENT PROCEDURES ).
  4. Transmission in "Park" or "Neutral".

Timing procedure:

  1. Connect timing light.
  2. Loosen distributor mounting bolt.
  3. Adjust timing to specification: 12°BTDC @ 900 rpm.
  4. Tighten distributor mounting bolt.
  5. Recheck timing, repeat adjustment if necessary.
Customer: replied 8 years ago.
I need to know the procedure for setting the timing between the camshaft and the crankshaft.
Expert:  Lurch replied 8 years ago.

Thanks for the added Info:

Here is ISUZU proceedure (.pdf)

click below



Related Car Questions