How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donny Your Own Question
Donny, ASE Certified Technician
Category: Car
Satisfied Customers: 828
Experience:  A.S.E. Master Technician, Over 25 years working in Chrysler dealers, Top tech DaimlerChrysler 1998
Type Your Car Question Here...
Donny is online now
A new question is answered every 9 seconds

2004 Chrysler 300m- where is the cam shaft sensor located

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Car
Expert:  Donny replied 8 years ago.


On the 3.2L/3.5L

The camshaft position sensor is installed in the timing belt housing cover above the left camshaft sprocket.

  1. Disconnect the negative battery cable.
  2. Loosen the upper intake plenum
  3. Disconnect electrical connector from sensor.
  4. Remove camshaft position sensor screw.
  5. Pull sensor up out of the timing belt housing cover.



I hope that this helps you

Thank you


Donny and 9 other Car Specialists are ready to help you

Related Car Questions