How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Dan Your Own Question

Dan
Dan, Auto Service Technician
Category: Car
Satisfied Customers: 3490
Experience:  GM ASEP A.A.S. 14 years GM experience. Mark of Excellence and Professional Guild awarded.
Type Your Car Question Here...
Dan is online now
A new question is answered every 9 seconds

firing order for 5.7 liter gmc truck

Resolved Question:

No Comment Added
Submitted: 6 years ago.
Category: Car
Expert:  Dan replied 6 years ago.
What year truck is this?
Customer: replied 6 years ago.
Reply to Dan's Post: 1997 GMC SIERRA 5.7 LITER
Expert:  Dan replied 6 years ago.
Engine Mechanical Specifications (5.7 L)

Application

Specification

Metric

English

General Data

  • Engine Type

V8

  • Displacement

5.7 L

350 CID

  • RPO (VIN Code)

L31 (R)

  • Bore

101.63 mm

4.0012 in

  • Stroke

88.39 mm

3.480 in

  • Compression Ratio

9.4:1

  • Firing Order

1-8-4-3-6-5-7-2

  • Spark Plug Gap

1.52 mm

0.060 in

  • Oil Pressure (Minimum at Normal Operating Temperature)

42 kPa at 1,000 RPM

125 kPa at 2,000 RPM

166 kPa at 4,000 RPM

6 psig at 1,000 RPM

18 psig at 2,000 RPM

24 psig at 4,000 RPM

Camshaft

  • End Play

0.05-0.30 mm

0.002-0.012 in

  • Journal Diameter

47.440-47.490 mm

1.8677-1.8697 in

  • Journal Diameter Out-of-Round

0.025 mm (Maximum)

0.0010 in (Maximum)

  • Lobe Lift (Exhaust)

7.20-7.30 mm

0.283-0.287 in

  • Lobe Lift (Intake)

6.97-7.07 mm

0.274-0.278 in

  • Runout

0.065 mm (Maximum)

0.0026 in (Maximum)

Connecting Rod

  • Connecting Rod Bearing Clearance (Production)

0.033-0.078 mm

0.0013-0.0031 in

  • Connecting Rod Bearing Clearance (Service)

0.025-0.063 mm

0.0010-0.0025 in

  • Connecting Rod Journal Diameter

53.304-53.334 mm

2.0986-2.0998 in

  • Connecting Rod Journal Out-of-Round (Production)

0.007 mm (Maximum)

0.0003 in (Maximum)

  • Connecting Rod Journal Out-of-Round (Service)

0.025 mm (Maximum)

0.0010 in (Maximum)

  • Connecting Rod Journal Taper (Production)

0.007 mm (Maximum)

0.0003 in (Maximum)

  • Connecting Rod Journal Taper (Service)

0.025 mm (Maximum)

0.0010 in (Maximum)

  • Connecting Rod Side Clearance

0.15-0.68 mm

0.006-0.027 in

Crankshaft

  • Crankshaft Bearing Clearance (Journal #1--Production)

0.018-0.053 mm

0.0007-0.0021 in

  • Crankshaft Bearing Clearance (Journal #2, #3, and #4--Production)

0.030-0.068 mm

0.0012-0.0027 in

  • Crankshaft Bearing Clearance (Journal #5--Production)

0.020-0.060 mm

0.0008-0.0024 in

  • Crankshaft Bearing Clearance (Journal #1--Service)

0.025-0.051 mm

0.0010-0.0020 in

  • Crankshaft Bearing Clearance (Journal #2, #3, and #4--Service)

0.025-0.064 mm

0.0010-0.0025 in

  • Crankshaft Bearing Clearance Service (Journal #5--Service)

0.038-0.063 mm

0.0015-0.0025 in

  • Crankshaft End Play

0.05-0.20 mm

0.002-0.008 in

  • Crankshaft Journal Diameter (Journal #1)

62.189-62.212 mm

2.4484-2.4493 in

  • Crankshaft Journal Diameter (Journal #2, #3, and #4)

62.181-62.207 mm

2.4481-2.4491 in

  • Crankshaft Journal Diameter (Journal #5)

62.185-62.207 mm

2.4482-2.4491 in

  • Crankshaft Journal Out-of-Round (Production)

0.005 mm (Maximum)

0.0002 in (Maximum)

  • Crankshaft Journal Out-of-Round (Service)

0.025 mm (Maximum)

0.0010 in (Maximum)

  • Crankshaft Journal Taper (Production)

0.005 mm (Maximum)

0.0002 in (Maximum)

  • Crankshaft Journal Taper (Service)

0.025 mm (Maximum)

0.0010 in (Maximum)

  • Crankshaft Runout at Rear Flange

0.038 mm

0.0015 in

Cylinder Bore

  • Diameter

101.618-101.643 mm

4.0007-4.0017 in

  • Out-of-Round (Production)

0.025 mm

0.0010 in

  • Out-of-Round (Service)

0.05 mm

0.002 in

  • Taper (Production--Relief Side)

0.025 mm

0.0010 in

  • Taper (Production--Thrust Side)

0.012 mm

0.0005 in

  • Taper (Service Limit)

0.025 mm

0.0010 in

Cylinder Head

  • Surface Flatness (Engine Block Deck)

0.10 mm

0.004 in

  • Surface Flatness (Exhaust Manifold Deck)

0.05 mm

0.002 in

  • Surface Flatness (Intake Manifold Deck)

0.10 mm

0.004 in

Exhaust Manifold

  • Surface Flatness (Flange to Flange)

0.25 mm

0.010 in

  • Surface Flatness (Individual Flange)

0.05 mm

0.002 in

Piston

  • Piston Bore Clearance (Production)

0.018-0.061 mm

0.0007-0.002 in

  • Piston Bore Clearance (Service)

0.018-0.068 mm

0.0007-0.0026 in

Piston Pin

  • Clearance in Piston (Production)

0.013-0.023 mm

0.0005-0.0009 in

  • Clearance in Piston (Service)

0.013-0.025 mm

0.0005-0.0010 in

  • Diameter

23.545-23.548 mm

0.9270-0.9271 in

  • Interference Fit in Connecting Rod

0.012-0.050 mm

0.0005-0.0019 in

Piston Rings (End Gap Measured in Cylinder Bore)

  • Piston Compression Ring Gap (Production--Top Groove)

0.25-0.40 mm

0.098-0.015 in

  • Piston Compression Ring Gap (Production--2nd Groove)

0.038-0.058 mm

0.0014-0.0022 in

  • Piston Compression Ring Gap (Service--Top Groove)

0.25-0.50 mm

0.009-0.019 in

  • Piston Compression Ring Gap (Service--2nd Groove)

0.038-0.058 mm

0.0014-0.0022 in

  • Piston Compression Ring Groove Clearance (Production--Top Groove)

0.030-0.070 mm

0.0012-0.0027 in

  • Piston Compression Ring Groove Clearance (Production--2nd Groove)

0.040-0.080 mm

0.0015-0.003 in

  • Piston Compression Ring Groove Clearance (Service Limit--Top Groove)

0.030-0.090 mm

0.0012-0.0035 in

  • Piston Compression Ring Groove Clearance (Service Limit--2nd Groove)

0.040-0.100 mm

0.0015-0.0040 in

  • Piston Oil Ring Gap (Production)

0.25-0.76 mm

0.009-0.029 in

  • Piston Oil Ring Gap (Service)

0.25-0.90 mm

0.009-0.035 in

  • Piston Oil Ring Groove Clearance (Production)

0.046-0.196 mm

0.0018-0.0077 in

  • Piston Oil Ring Groove Clearance (Service)

0.046-0.200 mm

0.0018-0.0078 in

Valve System

  • Valve Face Angle

45 degrees

  • Valve Head Edge Margin

0.79 mm (Minimum)

0.031 in (Minimum)

  • Valve Lash

Rotate the Valve Rocker Arm Nut Clockwise 360 degrees (1 Turn) from Zero Lash

  • Valve Lifter

Hydraulic Roller

  • Valve Rocker Arm Ratio

1.5:1

  • Valve Seat Angle

46 degrees

  • Valve Seat Runout

0.05 mm (Maximum)

0.002 in (Maximum)

  • Valve Seat Width (Exhaust--Heavy Duty)

1.50-2.56 mm

0.059-0.101 in

  • Valve Seat Width (Exhaust--Light Duty)

1.65-2.49 mm

0.065-0.098 in

  • Valve Seat Width (Intake)

1.02-1.65 mm

0.040-0.065 in

  • Valve Spring Free Length

51.3 mm

2.02 in

  • Valve Spring Installed Height (Exhaust)

42.92-43.43 mm

1.67-1.70 in

  • Valve Spring Installed Height (Intake)

42.92-43.43 mm

1.67-1.70 in

  • Valve Spring Pressure (Closed)

338-374 N at 43.2

76-84 lb at 1.70

  • Valve Spring Pressure (Open)

832-903 N at 32.3

187-203 lb at 1.27

  • Valve Stem Clearance (Exhaust--Production)

0.025-0.069 mm

0.0010-0.0027 in

  • Valve Stem Clearance (Intake--Production)

0.025-0.069 mm

0.0010-0.0027 in

  • Valve Stem Clearance (Exhaust--Service)

0.025-0.094 mm

0.0010-0.0037 in

  • Valve Stem Clearance (Intake--Service)

0.025-0.094 mm

0.0010-0.0037 in

  • Valve Stem Diameter

8.661-8.679 mm

0.3410-0.3416 in

  • Valve Stem Oil Seal Installed Height (Measured from the Top of the Large Valve Guide Bevel to the Bottom of the Valve Stem Oil Seal)

1-2 mm

0.03937-0.07874 in

Dan, Auto Service Technician
Category: Car
Satisfied Customers: 3490
Experience: GM ASEP A.A.S. 14 years GM experience. Mark of Excellence and Professional Guild awarded.
Dan and 9 other Car Specialists are ready to help you

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
< Last | Next >
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
  • used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future. David L. Richmond, TX
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil Marysville, CA
  • Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible. Charles Walnut Creek, CA
  • As a single woman, I really appreciate an excellent and affordable opinion.
    Thank you Geordie, I will not hesitate to contact justanswer in the future!
    Sue Charleston, WV
  • Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff. Jim Castleberry, FL
  • Excellent reply, and also very quick. Really sounds like the Expert knows what he is talking about. I will be back to use your service when I need more help with my RV. Dutch USA
 
 
 

Meet The Experts:

 
 
 
  • Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
< Last | Next >
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka-Moose)'s Avatar

    Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
  • http://ww2.justanswer.com/uploads/TE/TedG/2012-6-15_14759_avaLarge.64x64.jpg Ted G.'s Avatar

    Ted G.

    ASE Certified Technician

    Satisfied Customers:

    1596
    20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness
  • http://ww2.justanswer.com/uploads/joecamel90/2008-11-13_03615_head_shot.jpg George H.'s Avatar

    George H.

    ASE Certified Technician

    Satisfied Customers:

    1311
    ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist
  • http://ww2.justanswer.com/uploads/AM/amedee/2013-10-24_23656_Amedee1.64x64.jpg Amedee's Avatar

    Amedee

    ASE Master Tech

    Satisfied Customers:

    2367
    ASE Master Tech advanced level specialist
  • http://ww2.justanswer.com/uploads/SU/supermechanic/2013-8-23_03546_500.64x64.jpg Jerry's Avatar

    Jerry

    Master Mechanic

    Satisfied Customers:

    1906
    ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager
  • http://ww2.justanswer.com/uploads/CR/crzydrvr00/2013-11-3_12123_246347.64x64.jpg Richard's Avatar

    Richard

    ASE Certified Technician

    Satisfied Customers:

    942
    12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes
  • http://ww2.justanswer.com/uploads/ST/Steve7654/2012-6-5_215929_japic800x660.64x64.jpg Steve's Avatar

    Steve

    Auto Service Technician

    Satisfied Customers:

    1980
    25+ yrs experience as a professional working technician; ASE L1 master technician