How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Carhelp4u Your Own Question
Carhelp4u
Carhelp4u, ASE CERTIFIED TECH
Category: Car
Satisfied Customers: 5203
Experience:  ASE CERTIFICATION
3903212
Type Your Car Question Here...
Carhelp4u is online now
A new question is answered every 9 seconds

How do you change tensioner and serp belt on a 95 olds aurora?

Resolved Question:

how do you change tensioner and serp belt on a 95 olds aurora?
Submitted: 8 years ago.
Category: Car
Expert:  Carhelp4u replied 8 years ago.
What engine do you have in your aurora?
Customer: replied 8 years ago.
Reply to carhelp4uhere's Post: i have a 4.0
Expert:  Carhelp4u replied 8 years ago.

Ok here is what I have got for replacement of the items you listed. Feel free to contact me with any questions or problems!! Good luck!


Object Number: 52981  Size: SH

  • Insert a 1/2-inch drive ratchet in the drive belt tensioner (6).
  • Rotate the drive belt tensioner clockwise in order to release the belt tension.
  • Remove the drive belt from the power steering pulley (1).
  • Slowly return the drive belt tensioner to its original position.
  • Remove the drive belt from the remaining pulleys (2-5).
  • Remove the bolt retaining the tensioner.
  • Install new tensioner and replace bolt.
  • Object Number: 52981  Size: SH

  • Place the belt around the power steering pulley (1). Twist the belt in order to clear the front cover bolts. Let the belt hang from the power steering pulley.
  • Twist the belt in order to clear the tensioner and front cover.
  • Wrap the belt around the generator pulley (2).
  • Remove the belt from the power steering pulley in order to give you slack in the belt.
  • Raise the vehicle.
  • Wrap the belt around the crankshaft (5) and compressor (4) pulleys.
  • Install the right side splash shield.
  • Lower the vehicle.
  • Position the belt around the power steering pulley.
  • Release the tensioner (6).
  • Carhelp4u and other Car Specialists are ready to help you