How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Virtual Wrench Your Own Question
Virtual Wrench
Virtual Wrench, Master Mechanic
Category: Car
Satisfied Customers: 14618
Experience:  35 years/Master Tech. Foreign and Domestic
2617050
Type Your Car Question Here...
Virtual Wrench is online now
A new question is answered every 9 seconds

1977 280z: oil seals..remove the timing chain and gears..1st cylinder

Customer Question

I am working on a 1977 280z. last year I took the top off to replace the oil seals on the valves. I had to remove the timing chain and gears--- I thought I could just put it back together by lining up the destributor to NO. 1 and 1st cylinder to tdc and putting on the chain but it is off a tooth or two. Before I take it all a part again I want to know if there is a good diagram to help me!!!
Submitted: 8 years ago.
Category: Car
Expert:  Virtual Wrench replied 8 years ago.

Hello

Instead of me typing out the instructions, here is a link to a site that will give you all the info you need to get it back up and running. Click here

 


If you have further questions on this, please feel free to reply.


Thanks for asking!