How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20516
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
1609972
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

2005 ford: keys..freestyle..i dont know the door unlock code, how do i

Resolved Question:

i locked my keys in my 2005 ford freestyle and i dont know the door unlock code, how do i reset it so i can get inside
Submitted: 9 years ago.
Category: Car
Expert:  Lurch replied 9 years ago.

Unless you know the Factory KeyPad code, you cannot Reset or Unlock without it or your Personal Code:

REMOTE KEYLESS ENTRY KEYPAD CODE PROGRAMMING

NOTE:

  • The system only allows one personal code to be programmed.
  • Any existing personal code does not need to be erased to program a new code.
  1. Enter the permanent factory remote keyless entry (RKE) keypad code.
  2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
  3. Within 5 seconds , enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.
Lurch and 3 other Car Specialists are ready to help you
Customer: replied 9 years ago.
Reply to Lurch's Post: is there anyway to get the factory code, i bought this suv used and did not get the code from the previous owner
Expert:  Lurch replied 9 years ago.
The Code is sometimes located on the Keyless / GEM Module, but can be retrieved by Ford Scan Tool. If the Vehicle is Locked, it would still have to be Opened another way
Lurch and 3 other Car Specialists are ready to help you