How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Joel Your Own Question

Joel
Joel, Auto Service Technician
Category: Car
Satisfied Customers: 1599
Experience:  18 years and growing GM, ASE certified. Specializing in Chevy, Buick, Olds, Pontiac.ASK!
Type Your Car Question Here...
Joel is online now
A new question is answered every 9 seconds

2002 Saturn: Im working..twin cam..torque specs..the overhead cam cap

Resolved Question:

I'm working on a 2002 Saturn 1.9 sc2 twin cam. I'm doing a head job and I need to know what the torque specs are for the overhead cam cap to the head.
Submitted: 6 years ago.
Category: Car
Expert:  Joel replied 6 years ago.

Hello and welcome. Here is the info you need, and then some, incase you needed more.....

A/C Compressor Brackets-to-Head/Block

25 N·m

19 lb ft

A/C Compressor-to-Front Bracket

54 N·m

40 lb ft

A/C Compressor-to-Rear Bracket

25 N·m

19 lb ft

A/C Compressor-to-Rear Bracket

30 N·m

22 lb ft

Accelerator Control Cable Bracket-to-Intake Manifold (L24)

30 N·m

22 lb ft

Axle Shaft Intermediate Bracket-to-Block

55 N·m

41 lb ft

Battery Hold Down Nut

9 N·m

80 lb in

Battery Terminal Bolts

17 N·m

13 lb ft

Belt Idler Pulley-to-Front Cover

27 N·m

20 lb ft

Belt Tensioner Idler Pulley Bolt

27 N·m

20 lb ft

Belt Tensioner-to-Block

30 N·m

22 lb ft

Belt Tensioner-to-Front Cover

27 N·m

20 lb ft

Brake Caliper Bolt

110 N·m

81 lb ft

Camshaft Bearing Cap-to-Head

14 N·m

10 lb ft

Camshaft Cover-to-Head

10 N·m

89 lb in

Camshaft Sprockets-to-Camshafts

100 N·m

74 lb ft

Camshaft Thrust Bearing-to-Head (L24)

25 N·m

19 lb ft

Canister Purge Solenoid-to-Block

22 N·m

16 lb ft

Clutch Pressure Plate-to-Flywheel

25 N·m

19 lb ft

Connecting Rod Cap-to-Rod

25 N·m+75°

19 lb ft+75°

Coolant Drain-to-Plug/Block

30 N·m

22 lb ft

Coolant Temperature Sensor

8 N·m

71 lb in

Crankshaft Bearing Cap-to-Block

50 N·m

37 lb ft

Crankshaft Bearing Tie Plates

25 N·m

18 lb ft

Crankshaft Bearing Tie Plate Insert

3.5 N·m

31 lb in

Crankshaft Bearing Tie Plate-to-Oil Pan Rail

55 N·m

41 lb ft

Crankshaft Position Sensor

9 N·m

80 lb in

Crankshaft Pulley Bolt (L24)

215 N·m

159 lb ft

Crankshaft Rear Oil Seal Assembly-to-Block

11 N·m

97 lb in

Crankshaft Vibration Damper/Pulley-to-Crankshaft

215N·m

159 lb ft

Cylinder Block Drain Plugs

35 N·m

26 lb ft

Cylinder Head Bolts

Cylinder Head Bolts - First Pass

30 Cylinder Head Bolt Tightening Sequence

22 Cylinder Head Bolt Tightening Sequence

Cylinder Head Bolts - First Pass

30 N·m

22 lb ft

Cylinder Head Bolts - Second Pass (DOHC)

45 N·m

33 lb ft

Cylinder Head Bolts - Second Pass (SOHC)

45 N·m

33 lb ft

Cylinder Head Bolts - Final Pass

90 degrees in sequence

Deaeration Line Clamps-to-Engine Bracket (L24)

11 N·m

97 lb in

Deaeration Line Fitting-to-Cylinder Head (L24)

9 N·m

80 lb in

EGR Valve-to-Head

30 N·m

22 lb ft

EGR Valve-to-Head

25 N·m

19 lb ft

Engine Block Heater Bolt

25 N·m

18 lb ft

Engine Mount-to-Front Cover Nuts

50 N·m

37 lb ft

Engine Mount-to-Midrail Bracket Nuts

50 N·m

37 lb ft

Engine Stiffening Bracket

47 N·m

35 lb ft

Engine Strut-to-Frame Bracket and Engine Strut-to-Engine Bracket

70 N·m

52 lb ft

Engine/Transaxle Grounds

25 N·m

19 lb ft

Exhaust Manifold Studs-to-Head

13 N·m

9.5 lb ft

Exhaust Manifold-to-Head (L24)

22 N·m

16 lb ft

Exhaust Manifold-to-Head (LL0)

18 N·m

13 lb ft

Exhaust Pipe Bracket to Stiffener Bracket

47 N·m

35 lb ft

Exhaust Pipe to Catalytic Converter

48 N·m

35 lb ft

Exhaust Pipe to Manifold

31 N·m

23 lb ft

Exhaust Pipe to Support Bracket

31 N·m

23 lb ft

Flexplate-to-Converter

70 N·m

52 lb ft

Flexplate-to-Crankshaft

60 N·m

44 lb ft

Flywheel-to-Crankshaft

80 N·m

59 lb ft

Frame-to-Body

205 N·m

151 lb ft

Front A/C Bracket-to-Block

47 N·m

35 lb ft

Front Cover Lower Center Bolt (Number 14)

10 N·m

89 lb in

Front Cover Perimeter Bolts

30 N·m

22 lb ft

Front Mount-to-Engine Block

55 N·m

41 lb ft

Fuel Line Retainer Clip

4 N·m

35 lb in

Generator Bolts

32 N·m

24 lb ft

Generator/Starter Battery Positive Terminal

10 N·m

89 lb in

Intake Manifold Brace-to-Block (LL0)

10 N·m

89 lb in

Intake Manifold Studs-to-Head

13 N·m

9.5 lb ft

Intake Manifold Support Bracket (L24)-to-Block and Intake

30 N·m

22 lb ft

Intake Manifold-to-Head (L24)

30 N·m

22 lb ft

Intake Manifold-to-Head (LL0)

13 N·m

9.5 lb ft

Knock Sensor

25 N·m

19 lb ft

Knuckle Attachment Bolts-to-Strut

200 N·m

148 lb ft

Lower Transaxle Bolts

130 N·m

96 lb ft

Oil Gallery Plug-to-Block

30 N·m

22 lb ft

Oil Level Indicator Tube-to-Block

30 N·m

22 lb ft

Oil Pan Drain Plug

37 N·m

27 lb ft

Oil Pan-to-Block

9 N·m

80 lb in

Oil Pickup Tube Bracket-to-Tie Plate

15 N·m

11 lb ft

Oil Pickup Tube-to-Block

15 N·m

11 lb ft

Oil Pressure Sending Unit

45 N·m

33 lb ft

Oil Pump Cover-to-Front Cover

11 N·m

8 lb ft

Oxygen Sensor

25 N·m

19 lb ft

Oxygen Sensor

45 N·m

33 lb ft

Power Steering Pump Brace-to-Block

30 N·m

22 lb ft

Power Steering Pump Bracket-to-Block

30 N·m

22 lb ft

Power Steering Pump-to-Bracket

30 N·m

22 lb ft

Rocker Arm Cover-to-Head (L24)

30 N·m

22 lb ft

Rocker Arm Shaft-to-Head

25 N·m

19 lb ft

Spark Plug-to-Head

27 N·m

20 lb ft

Starter Motor-to-Block

37 N·m

27 lb ft

Starter Solenoid Terminal

5 N·m

44 lb in

Starter Support Bracket-to-Axle Shaft Bracket

30 N·m

22 lb ft

Steering Shaft U-Joint Bolt

47 N·m

35 lb ft

Stiffening Bracket-to-Engine/Transaxle

54 N·m

40 lb ft

Strut Bracket-to-Frame Nuts

50 N·m

37 lb ft

Support Bracket-to-Intake Manifold (LL0)

10 N·m

89 lb in

Support Bracket-to-Intermediate Shaft Support Bracket (LL0)

30 N·m

22 lb ft

Throttle Body-to-Air Intake Manifold (LL0)

12 N·m

9 lb ft

Timing Chain Fixed Block-to-Head

26 N·m

19 lb ft

Timing Chain Fixed Guide-to-Block

26 N·m

19 lb ft

Timing Chain Pivot Guide-to-Head

26 N·m

19 lb ft

Timing Chain Tensioner-to-Block

19 N·m

168 lb in

Timing Chain Tensioner-to-Block

19 N·m

14 lb ft

Transaxle Dust Cover

10 N·m

89 lb in

Upper Engine Mount-to-Front Cover

50 N·m

37 lb ft

Upper Engine Mount-to-Front Rail Bracket

50 N·m

37 lb ft

Upper Mount-to-Frame Rail Bracket

50 N·m

37 lb ft

Upper Transaxle Bolts

90 N·m

66 lb ft

Water Pump Pulley-to-Water Pump Hub

25 N·m

19 lb ft

Water Pump-to-Block

30 N·m

22 lb ft

Wheel Nuts

140 N·m

103 lb ft

Wiring Harness (PCM Ground)

10 N·m

89 lb in

Wiring Harness-to-Transaxle Case/Engine Block

25 N·m

18 lb ft

Joel, Auto Service Technician
Category: Car
Satisfied Customers: 1599
Experience: 18 years and growing GM, ASE certified. Specializing in Chevy, Buick, Olds, Pontiac.ASK!
Joel and 19 other Car Specialists are ready to help you

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
< Last | Next >
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
  • used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future. David L. Richmond, TX
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil Marysville, CA
  • Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible. Charles Walnut Creek, CA
  • As a single woman, I really appreciate an excellent and affordable opinion.
    Thank you Geordie, I will not hesitate to contact justanswer in the future!
    Sue Charleston, WV
  • Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff. Jim Castleberry, FL
  • The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time! Paul M Corpus Christi, TX
 
 
 

Meet The Experts:

 
 
 
  • Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
< Last | Next >
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka-Moose)'s Avatar

    Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
  • http://ww2.justanswer.com/uploads/TE/TedG/2012-6-15_14759_avaLarge.64x64.jpg Ted G.'s Avatar

    Ted G.

    ASE Certified Technician

    Satisfied Customers:

    1596
    20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness
  • http://ww2.justanswer.com/uploads/joecamel90/2008-11-13_03615_head_shot.jpg George H.'s Avatar

    George H.

    ASE Certified Technician

    Satisfied Customers:

    1311
    ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist
  • http://ww2.justanswer.com/uploads/AM/amedee/2013-10-24_23656_Amedee1.64x64.jpg Amedee's Avatar

    Amedee

    ASE Master Tech

    Satisfied Customers:

    2367
    ASE Master Tech advanced level specialist
  • http://ww2.justanswer.com/uploads/SU/supermechanic/2013-8-23_03546_500.64x64.jpg Jerry's Avatar

    Jerry

    Master Mechanic

    Satisfied Customers:

    1906
    ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager
  • http://ww2.justanswer.com/uploads/CR/crzydrvr00/2013-11-3_12123_246347.64x64.jpg Richard's Avatar

    Richard

    ASE Certified Technician

    Satisfied Customers:

    942
    12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes
  • http://ww2.justanswer.com/uploads/ST/Steve7654/2012-6-5_215929_japic800x660.64x64.jpg Steve's Avatar

    Steve

    Auto Service Technician

    Satisfied Customers:

    1980
    25+ yrs experience as a professional working technician; ASE L1 master technician