How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall (Cheeko) Your Own Question
Randall    (Cheeko)
Randall (Cheeko), Auto Mechanic
Category: Car
Satisfied Customers: 2395
Experience:  Auto Mechanic
Type Your Car Question Here...
Randall (Cheeko) is online now
A new question is answered every 9 seconds

how to put in a serpentine belt for 2001 oldsmobile intrigue

Customer Question

I need a diagram for putting in a serpentine belt
Submitted: 10 years ago.
Category: Car
Expert:  Randall (Cheeko) replied 10 years ago.

Hi, below are the steps, thanks

Drive Belt Replacement

Removal Procedure

  1. Remove the surge tank
    1. Remove the drive belt tension by lifting or rotating the drive belt tensioner off of the drive belt, using a 1/2 inch breaker bar.
    2. Remove the drive belt.
    3. Inspect all the components and pulleys driven by the drive belt.

    Installation Procedure

    Important: Ensure that the drive belt is aligned into the proper grooves of the accessory drive belt pulleys

  2. graphic


    1. Install the drive belt under the drive belt tensioner pulley by lifting or rotating the drive belt tensioner, using a 1/2 inch breaker bar. Install the drive belt.
    2. Inspect the drive belt and the drive belt system.
    3. Ensure that the drive belt is properly routed.
    4. Inspect the drive belt length scale on the drive belt tensioner for the proper installed length.
    5. Install the surge tank.