How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Bob Your Own Question

Bob
Bob, Auto Service Technician
Category: Car
Satisfied Customers: 4087
Experience:  40 year GM Tech. +30 Certified. ASE Master Tech.(expired, retired) Medium Duty, Heavy Line, Retired
Type Your Car Question Here...
Bob is online now
A new question is answered every 9 seconds

How to remove a 2007 yukon headlamp for bulb replacement

Resolved Question:

Please provide the proceedure for removing the headlamp assembly to replacing the low/high beam bulb in a 2007 yukon.

Thank you
Submitted: 7 years ago.
Category: Car
Expert:  Bob replied 7 years ago.
Document ID#(NNN) NNN-NNNN
2007 GMC Truck Yukon - 4WD

Headlamp Replacement (Yukon)


Object Number:(NNN) NNN-NNNN Size: SF

Preliminary Procedures

  1. Remove the 2 forward wheelhouse liner screws.
  2. Remove the 2 washer container push pins.
  3. Open the hood.
  4. Remove the 6 upper fascia bolts right to the hood latch mechanism.
  5. Remove the lower rear fascia bolt from the support bracket.
  6. Loosen the 2 fascia to fender bolts from under the fascia.
  7. Pull the outboard end of the front fascia straight outboard until it disengages from the fender attachment bracket.
  8. Pull the fascia forward and downward to allow enough clearance to remove the headlamp assembly.
  9. Loosen the lower outboard attachment bolts.
  10. Remove the 2 upper headlamp bolts.
  11. Grasp the headlamp at the upper inboard and lower outboard side and pull the headlamp forward to disengage the locating tab.
  12. Pull the outboard side of the headlamp forward until the 2 locating pins disengage from the radiator support.
  13. Disconnect the forward lamp harness connector.

1

Headlamp Bolt (Qty: 2)

Tip
Secure the headlamp using the sequence as listed.

Tighten
6 N·m (53 lb in)

2

Headlamp Bolt

Tip
Loosen the lower outer fender bolt but do not remove.

Tighten
6 N·m (53 lb in)

3

Headlamp Assembly

Tip
Upon assembly, align the 2 outer locating pins and one inner alignment tab to the radiator support prior to applying pressure to the lamp in order to seat the lamp.


Document ID#(NNN) NNN-NNNN
2007 GMC Truck Yukon - 4WD
Document ID#(NNN) NNN-NNNN
2007 GMC Truck Yukon - 4WD

 

Headlamp Bulb Replacement (Yukon)


Object Number:(NNN) NNN-NNNN Size: MF

Callout

Component Name

Preliminary Procedure

Remove the headlamp

1

High Low Beam Bulb


Document ID#(NNN) NNN-NNNN
2007 GMC Truck Yukon - 4WD

Bob, Auto Service Technician
Category: Car
Satisfied Customers: 4087
Experience: 40 year GM Tech. +30 Certified. ASE Master Tech.(expired, retired) Medium Duty, Heavy Line, Retired
Bob and 9 other Car Specialists are ready to help you

JustAnswer in the News:

 
 
 
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
 
 
 

What Customers are Saying:

 
 
 
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
< Last | Next >
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P Elm City, NC
  • used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future. David L. Richmond, TX
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil Marysville, CA
  • Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible. Charles Walnut Creek, CA
  • As a single woman, I really appreciate an excellent and affordable opinion.
    Thank you Geordie, I will not hesitate to contact justanswer in the future!
    Sue Charleston, WV
  • Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff. Jim Castleberry, FL
  • Excellent reply, and also very quick. Really sounds like the Expert knows what he is talking about. I will be back to use your service when I need more help with my RV. Dutch USA
 
 
 

Meet The Experts:

 
 
 
  • Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
< Last | Next >
  • http://ww2.justanswer.com/uploads/MU/muddyford/2012-6-13_1204_1.64x64.png Chris (aka-Moose)'s Avatar

    Chris (aka-Moose)

    Technician

    Satisfied Customers:

    846
    16 years of experience
  • http://ww2.justanswer.com/uploads/TE/TedG/2012-6-15_14759_avaLarge.64x64.jpg Ted G.'s Avatar

    Ted G.

    ASE Certified Technician

    Satisfied Customers:

    1596
    20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness
  • http://ww2.justanswer.com/uploads/joecamel90/2008-11-13_03615_head_shot.jpg George H.'s Avatar

    George H.

    ASE Certified Technician

    Satisfied Customers:

    1311
    ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist
  • http://ww2.justanswer.com/uploads/AM/amedee/2013-10-24_23656_Amedee1.64x64.jpg Amedee's Avatar

    Amedee

    ASE Master Tech

    Satisfied Customers:

    2367
    ASE Master Tech advanced level specialist
  • http://ww2.justanswer.com/uploads/SU/supermechanic/2013-8-23_03546_500.64x64.jpg Jerry's Avatar

    Jerry

    Master Mechanic

    Satisfied Customers:

    1906
    ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager
  • http://ww2.justanswer.com/uploads/CR/crzydrvr00/2013-11-3_12123_246347.64x64.jpg Richard's Avatar

    Richard

    ASE Certified Technician

    Satisfied Customers:

    942
    12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes
  • http://ww2.justanswer.com/uploads/ST/Steve7654/2012-6-5_215929_japic800x660.64x64.jpg Steve's Avatar

    Steve

    Auto Service Technician

    Satisfied Customers:

    1980
    25+ yrs experience as a professional working technician; ASE L1 master technician