How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20601
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
1609972
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

No Comment Added

Customer Question

No Comment Added
Submitted: 10 years ago.
Category: Car
Expert:  Lurch replied 10 years ago.
Do you have the 4.0 Engine?
Customer: replied 10 years ago.
Reply to Lurch's Post: YES, 4.0 6 CYL ENGINE
Expert:  Lurch replied 10 years ago.

 

  1. Remove the coolant overflow bottle retaining strap. Remove the coolant overflow bottle and bracket.

  2. Disengage the blower motor wiring.

  3. Remove the blower motor mounting fasteners.

  4. Remove the blower motor.

  5. Remove the blower motor fan from the motor shaft for access to the motor attaching nuts.

To install:

  1. Install the blower motor fan on the motor shaft.

  2. Install the blower motor and tighten the mounting fasteners.

  3. Engage the electrical connection.

  4. Install the coolant overflow bracket, bottle and retaining strap.

graphic
Fig. 2: Loosen and remove the blower motor retaining bolts

 

graphic
Fig. 3: Removing the blower motor from the vehicle