How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Danny Your Own Question
Danny, Shop foreman
Category: Car
Satisfied Customers: 566
Experience:  Senior Master Subaru, G.M.Cert.,Honda cert., Dodge Cert., Ford Cert., 2 ASE Master cert.15 yrs exp.
Type Your Car Question Here...
Danny is online now
A new question is answered every 9 seconds

old one..engine compartment to show me..5.3L V8 XLT model

Customer Question

I removed the old one expecting a schematic in the engine compartment to show me how to put the new one on. No such luck. I have the 5.3L V8 XLT model with a secondary A/C belt which is also giving me fits. Please help.

Optional Information:
2003 GMC Envoy 5.3L V8

Already Tried:
Removed the old belt

Submitted: 10 years ago.
Category: Car
Expert:  Danny replied 10 years ago.

Hope this helps. Please click accept for me. Thanks

Install 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise enough to relieve the tension on the drivebelt.
Object Number: 753677  Size: SH

Remove the drivebelt.

Release the tension on the tensioner arm.

Installation Procedure

    Object Number: 753677  Size: SH

Route the drivebelt over all the pulleys except the drivebelt tensioner pulley.

Install the 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise.

Install the drivebelt over the drivebelt tensioner pulley.

Slowly release the tension to the drivebelt tensioner arm.

Inspect for proper installation of the drivebelt on the pulleys.

Related Car Questions