How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask autodoc_2000 Your Own Question
autodoc_2000, Auto Service Technician
Category: Car
Satisfied Customers: 2563
Experience:  ASE Master Tech w/ Advance Engine Performance
Type Your Car Question Here...
autodoc_2000 is online now
A new question is answered every 9 seconds

Ford F150: what order to get tpo and change a water pump..V8

Customer Question

I need to know what to remove and in what order to get tpo and change a water pump on a Ford F150 w/302 V8
Submitted: 11 years ago.
Category: Car
Expert:  autodoc_2000 replied 11 years ago.

  1. Drain cooling system.
  2. On 1990-93 models, loosen fan clutch attaching bolts.
  3. On all models, remove fan shroud attaching bolts and position shroud over fan.
  4. On 1990-93 models, remove drive belt.
  5. On all models, disconnect lower radiator hose, heater hose and bypass hose from water pump.
  6. On 1987-89 models, remove drive belts.
  7. On all models remove fan, spacer, water pump pulley and fan shroud.
  8. On 1987-89 models, loosen alternator pivot bolt and alternator adjusting arm to water pump attaching bolt.
  9. On 1990-93 models, Remove A/C compressor/power steering pump bracket and accessories to clear water pump stub bolt.
  10. On all models, remove water pump attaching bolts and the water pump.
  11. Reverse procedure to install. Tighten water pump retaining bolts to specifications.

Related Car Questions