How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask stereoaz Your Own Question
stereoaz, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 113
Experience:  35 years in car audio,my shop won iasca world title ,custom fabrication,expert installer.
Type Your Car Electronics Question Here...
stereoaz is online now
A new question is answered every 9 seconds

Are you able to help with aftermarket speakers, amplifier,

Customer Question

Hi, are you able to help with aftermarket speakers, amplifier, and line put converter installation?
JA: No. I'm the Ford Mechanic's Assistant.
Customer: Is there anyone that could?
JA: What is the model/year of your Ford?
Customer: 2013 f150 xlt supercrew
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have new wiring from the amp to the speakers, all of the wires run. I donor k ow how to splice in my line out converter
JA: Have you checked all the fuses? Do you have a wiring diagram?
Customer: The one that came with the amplifier
JA: Anything else you think the mechanic should know?
Customer: I have an LC2i two channel output converter.
Submitted: 3 months ago.
Category: Car Electronics
Customer: replied 3 months ago.
I am not getting power to the line output converter, or to my amp. I have the right side front and rear (+) wires connected and the right side front and rear (-) wires connected to the corresponding LOC speaker inputs. The same with the left side.
I have remote ground hooked up to the LOC Output to the amplifier, and I have the RCA's running to the channel B input.
Expert:  kwiggins29059 replied 3 months ago.

Are you using the stock or an aftermarket radio? Did you run a wire to the remote terminal on the amp?

Customer: replied 3 months ago.
I am using stock radio. I have ran the the remote wire to the amp
Customer: replied 3 months ago.
The speaker wire from the harness to the LOC. The remote wire to the amp, and the RCA to the amp. Those are all the connections I have to the LOC
Expert:  Don 'Mo Lurch' replied 3 months ago.

Hi.....another Expert here.......
did you still need help on this?
IF so, please post the Brand & model AMP
What wires you connected to from the Factory Radio?

Related Car Electronics Questions