How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 20525
Experience:  over 30 years, ARA, Sony, Alpine, Audiovox, Kenwood, Muntz. Sales, Repair & Installation
1609972
Type Your Car Electronics Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I have a pioneer avhp5000. How do I get the message screen

Customer Question

I have a pioneer avhp5000. How do I get the message screen image may appear reversed to go way
Submitted: 9 months ago.
Category: Car Electronics
Expert:  Don 'Mo Lurch' replied 9 months ago.

.

sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
Make sure:
1) Camera is not connected to the Vehicle Reverse Light wire
Must be connected to Ignition + wire (like the RED wire of the Pioneer)
2) Pioneer VIOLET / WHITE wire is connected to the Vehicle Reverse Light wire
3) Rear View is set to OFF in Camera Settings

.
IF you need more information, please ask "prior" to Rating.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.

Customer: replied 9 months ago.
The radio was working fine wired as it was...I accidentally hit a button...don'the remember which button and the the screen keeps going black...you can hear the radio but the message screen image may appear reversed.
What button did I hit or what button or buttons must I hit to take away the back screen and message?
Expert:  Don 'Mo Lurch' replied 9 months ago.

you needed to post that first........
IF the Camera was working & is connected "correctly", then you need to RESET the Unit with the Pinhole Button behind the Face

Expert:  Don 'Mo Lurch' replied 9 months ago.

sorry.........not able to call
Please RESET Unit

Expert:  Don 'Mo Lurch' replied 9 months ago.

.
Hello again Lurch here.

I noticed we have not yet resolved your concern you asked about.

If I have helped, please RATE my answer

I would appreciate it if you would reply so I can offer my skills and knowledge and repair guide access to help as best I can.

If you have already rated my answer, then Thanks alot.

If you have new questions now or in the future please do not hesitate to ask them.

If you would like me to assist you. Just bookmark this page so you can access my profile easy and post a new question from the question box on my profile page.
.

Expert:  Don 'Mo Lurch' replied 9 months ago.

was there a problem?

Expert:  Don 'Mo Lurch' replied 9 months ago.

.

Related Car Electronics Questions