How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ElectronicsPete Your Own Question
ElectronicsPete
ElectronicsPete, Electronic Engineer
Category: Car Electronics
Satisfied Customers: 15768
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Car Electronics Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

My Car is Ford Mustang GT 4.6l 2005 year, I have problem

Customer Question

My Car is Ford Mustang GT 4.6l 2005 year,
I have problem with wire amplifier of Shaker 500 system
I need wiring diagram of subwoofer amplifier connector-pin (C 2993a, C 2994a) and subwoofer connector-pin (C 536-1, C536-2, C536-3, C536-4, C628-1, C628-2, C628-3,C628-4).
Wire from this pin was disconnected and I need to know position of wire to put back in pin?
Thank you;
Submitted: 10 months ago.
Category: Car Electronics
Expert:  ElectronicsPete replied 10 months ago.

Hi,

The wiring pin-outs for the Shaker 500 are halfway down the following page:

http://www.moddedmustangs.com/forums/2005-2010/167985-factory-amp-remote-wire-help.html

Customer: replied 10 months ago.
I send picture and i need to know that is correct

Related Car Electronics Questions