How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard
Richard, Customer Service
Category: Car Electronics
Satisfied Customers: 31329
Experience:  Over 20 years fixing Electronically devices
32989067
Type Your Car Electronics Question Here...
Richard is online now
A new question is answered every 9 seconds

I bought a 2000 4runner about a month ago and it has a

Customer Question

Hi there i bought a 2000 4runner about a month ago and it has a kenwood excelon ddx8017 with nav . I was working in my truck yesterday when i start it now it says enter code . i don't have the manuel. I already tried different codes from the internet didnt work. I need a master unlock code.
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Richard replied 1 year ago.

Hi there and welcome

You need the remote to try this procedure to unlock it

Your code number can be 5227 (KCAR)

* Press numeric key "5" ( 2 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 3 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 1 time ) and press the Track UP/Next Track key
* Press numeric key "7" ( 2 times ) and press the Track UP/Next Track key

Your radio will require one of the following procedures to enter it

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that "..." disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

If that fails, attempt with code 5227 (KCAR)

* Press numeric key "5" ( 2 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 3 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 1 time ) and press the Track UP/Next Track key
* Press numeric key "7" ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

On completion of the code reset procedure , hold the track up button down for 3 seconds.

Let me know if it then unlocks please

Related Car Electronics Questions