How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 11444
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your Car Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

Just installed a pioneer nex4100 in my wrangler and was

Customer Question

Just installed a pioneer nex4100 in my wrangler and was working fine til today. Now only back up camera works nothing else. It starts up in the camera mode not the usual start up screens. It won't let me do anything. I tried to unplug it all and rewired everything again to insure I didn't have a short or exposed wire. Still nothing. Need help!!
Shawn
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Louie replied 1 year ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, proposed preliminary tries (if have not been tried) :

  • • perform a microprocessor RESET;
  • • temporarily disconnect the violet/white wire.

Related Car Electronics Questions