How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Neil Your Own Question
Neil
Neil, Engineer
Category: Car Electronics
Satisfied Customers: 3735
Experience:  NZCE Electronics and Computing
15873252
Type Your Car Electronics Question Here...
Neil is online now
A new question is answered every 9 seconds

I am installing my son's new kenwood receiver

Customer Question

I am installing my son's new kenwood receiver model#kdc-158u,and it worked for about
5 min or so then the "protect" symbol came on and now it wont do anything but
power up.
What do I need to do.Power and grd is good and no fuses are blown.
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Neil replied 1 year ago.

Hi

You need to check all of the speaker connections both at the speakers and at the receiver...

Protect indicates a problem with the speaker wiring or a failed speaker. You will have to unplug the receiver from the wall and then reconnect once you have checked the speakers..

Related Car Electronics Questions