How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ElectronicsPete Your Own Question
ElectronicsPete, Electronic Engineer
Category: Car Electronics
Satisfied Customers: 17031
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Car Electronics Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

Kenwood ddx419. Just performed 1.05 firmware update and now

Customer Question

kenwood ddx419. Just performed 1.05 firmware update and now nothing works. Red light is on and i did a reset and even disconnect power and reconnected. Was working fine before the update
Submitted: 1 year ago.
Category: Car Electronics
Expert:  ElectronicsPete replied 1 year ago.
I am Pete, and I'll be happy to assist with your question today.
Did the firmware update complete fully, or was it interrupted?
You could attempt the update again, but if that is not possible then the system will need to be returned to Kenwood to have the firmware reinstalled using their specialist equipment.