How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 11448
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your Car Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

Trying to install a Pyle PLCM24iR rear camera to my Kenwood

Customer Question

Trying to install a Pyle PLCM24iR rear camera to my Kenwood DNX690HD (in a C5 Corvette). Wired pos and neg wires to back-up lights, and yellow cable from Camera to back of head unit. No picture when I put car in reverse. What do I need to do next?
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Louie replied 1 year ago.
Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, propose next check would be to ensure that the Kenwood's purple/white wire is also wired to the car's wiring that provides the back-up
+12V.

Please post back results / observations of the above once tried.

Related Car Electronics Questions