How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 20516
Experience:  over 30 years, ARA, Sony, Alpine, Audiovox, Kenwood, Muntz. Sales, Repair & Installation
1609972
Type Your Car Electronics Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I just got my 2010 ford escape back from my mechanic from getting

Customer Question

I just got my 2010 ford escape back from my mechanic from getting the battery changed and now my factory remote start wont start my vehicle. all the lights work and the doors lock when it does it. its all doing the normal routine but just not starting. what could be the problem?
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Don 'Mo Lurch' replied 1 year ago.
sorry for the delay............
.
Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”
.
This is a "Safety Feature", so the vehicle does not inadvertently start when Battery power is disconnected, then reconnected.
The Remote Start will need to be Reprogrammed to activate the Remote Start
apprx 1 hour labor
.
IF you need more information, please ask "prior" to Rating.
.
Please take a moment to rate my service so that I can get credit for my time.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
Rating is very Important to our Service
.
.
Customer: replied 1 year ago.
Thank you, ***** ***** i reprogram it myself then to get the remote start working?
Expert:  Don 'Mo Lurch' replied 1 year ago.
.
Problem is there is NO Customer procedure posted without the use of Ford Scan Tool.
A brief disconnection (less than 15 minutes) typically will not interfere with the working of the Keyless Entry / Remote Start, but a prolonged disconnect does
.

Related Car Electronics Questions