Recent Feedback
DEH P59001BHow do I change to the FM station to correspond with the XM reciever?
Optional Information: Type of Electronic: Stereo System
Thanks for using J/A / PearlMy answer is below.
Please understand, the site makes me post the following:
"Please only rate my answer if you are satisfied with the service I have provided. If you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have, because this will result in a negative mark on my feedback record. I will be happy to continue further and do everything I can to provide you with the service you seek.Instead, please simply reply to me via the REPLY TO EXPERT link with the issue you have. I am happy to continue further and do everything I can to provide you with the service you seek."My answer may not be to your liking, but is a correct & honest answer.Many times the only fix will be by Dealer or Shop, so please do not hold that against me.
------------------------------------------------------------------------------------------------------------
How do I change to the FM station to correspond with the XM reciever?
???
If you are using a "FM Modulated" XM Unit:
Be sure the XM Unit is On & a Station is showing on displayTypically FM Modulators use upper FM 87.1 - 89.9Press SEEK on the Pioneer to find the XM StationYou may have to press SEEK a number of times to find it
If you are NOT using a "FM Modulated" XM Unit :
If the XM Unit is plugged directly into the Pioneer:Press "AUX" or
Press SOURCE to select AUX as the source.
Press PGM to select the desired channel
select setting when selecting XM or SIRIUS
as the source.
Press PGM repeatedly to switch between the
following channel select settings:
Channel number (channel number select setting)-
Category (channel category select
setting)
If you need further, please ask "before" you Rate my Answer...............
When I'm in Aux, pressing PGM does nothing.
please understand.....I do not know "which" XM attachment you have ...FM Modulated or Plug In
Or if there is XM added to your vehicle.If you are not sure there is XM, you need to remove the Pioneer Unit & look for the XM Reciever Box that is plugged inMany times, after the battery goes low or the Unit has been reset, you have to Unplug the XM Unit & reconnect to have the Pioneer "relearn" the XM Reciever
It's a plugin attachment. Wire goes from back of piioneer to the xm reciever. I previously had a Sirius reciever but had it replaced w an xm unit. It works but gets fuzzy alot so I don't think its set to the proper FM station. When i'm in aux there is no channel displayed.
When you say "plug in attachment" I take it as a "SCC1" XM Tuner that plugs into the Pioneer via a "DIN Type" Cable
If not, please explain the connection, as there are "many" different ways to connect XM
Not sure how to id the cable. The Tuner is GEXP920xm
Thank you for the "added" info.......That is a "direct" plug in to the UnitWhile I do not show the DEH P5900 on the install list, it should workFM would have "nothing" to do with this Unit functioningIf XM is available (you need to have vehicle outside), then pressinf Source would turn the XM On
1 Press SOURCE to turn the head unit
on.
2 Press SOURCE to select "XM" source.
Press SOURCE repeatedly to switch between sources
if the reception is "fuzzy", then check outside XM Antenna (it must be the XM Antenna, NOT the Sirius Antenna)Check Antenna Lead & Unit Plug In at GEXP920xmUnit may be bad also
Experience: over 30 years, ARA, Sony, Alpine, Audiovox, Kenwood, Muntz. Sales, Repair & Installation