How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask stereoaz Your Own Question
stereoaz
stereoaz, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 187
Experience:  35 years in car audio,my shop won iasca world title ,custom fabrication,expert installer.
45259138
Type Your Car Electronics Question Here...
stereoaz is online now
A new question is answered every 9 seconds

i have a viper 474v remote start system. i was trying to program

Customer Question

i have a viper 474v remote start system. i was trying to program a new key fob to the system. now when i try to start the car the alarm goes off and will not shut off. do i need to try to reset the system. i tried disconnecting the batter and that did not work. any suggestions
Submitted: 5 years ago.
Category: Car Electronics
Expert:  stereoaz replied 5 years ago.

stereoaz :

how did you program the alarm remote ? steps?

stereoaz :

you should open drivers door turn ignition key on,pust valet button once,once again and hold till you hear a chirp.then push lock button on remote.this should program the lock unlock.will turn alarm on and off.try this and let me know

stereoaz :

did you try what i suggested?

stereoaz :

are you there?